Seat Leon Cupra K1 Forge intercooler and HPFP upgrade

This uprated intercooler replaces the original front mounted intercooler. It can either be used on its own or in combination with our “Twintercooler” kit. The intercooler uses a 650x400x50mm Bar and Plate core to full effect. We conducted testing on standard vehicles and those running larger turbos at 400hp.

On the standard car the intercooler achieved +10hp, +29 ft/lbs and a reduction in the inlet temperature of over 20°C. Where this really comes into its own, is on tuned engines, where the gains are even more impressive. The inlet and outlet tubes are 63mm which means our twintercooler hoses will fit, with the bayonet coupler removed or for those installing without our twintercooler kit, we include our FMKT010 silicone hoses for an easy installation.

The AUTOTECH HPFP fuel pump internals is a must when increasing the FUEL rail pressure beyond 120bar. This K1 will be setup for Stage 2 Plus calibration allowing upto 170bar if necessary, but we will cap this to 145bar.

A RS4 FPRV and brnad new cam follower installed.. ready for mapping.